Firmware version : V1.1.1
SETUP WIZARD
STEP 1: Open up a web browser and enter the default gateway’s IP address (192.168.0.1) in the Address\URL field.
STEP 2: Enter the username and password (admin/xxxxxxxx) according to device label
STEP 3: Click Login to log in to the Web page
This page will be shown by default for new device.
STEP 4: Click on Setup
STEP 5: Click on Next to Start Wizard.
STEP 6: Default mode is Gateway
STEP 7: Click Next to next step
STEP 8: Key in the PPP Username & Password
STEP 9: Click Next to continue
STEP 10: Click Next to continue
STEP 11: Maintain the default password configuration. (Password filled with current default random password according to device label)
STEP 12: Click Next to continue
STEP 13: Configure the 2.4 G and SSID and Password
STEP 14: Configure the 5 G and SSID and Password
STEP 15: Click Finished
Manual PPPoE Setup
STEP 1: Open up a web browser and enter the default gateway’s IP address (192.168.0.1) in the Address\URL field. STEP 2: Enter the username and password (admin/xxxxxxxx) according to device label STEP 3: Click Login to log in to the Web page STEP 4: Click TCP/IP STEP 5: Click WAN Setting STEP 6: Select WAN1 in Connection name STEP 7:Click IPv4 STEP 8: Select PPPoE STEP 9: Key in the PPP Username & Password STEP 10: Check to enable VLAN STEP 11: Fill in VLAN ID 500 STEP 12: Click Save & Apply the router to refresh