Cara setting wifi 2.4Ghz dilaptop

 Anda perlu run “WIFI OPTIMISER TOOL” dahulu utk dapat result channel number terbaik

channel bandwidth = 40Mhz 

channel number = 1

Pada RG Tplink set DUPLEX = SET AUTO NEGOTIATION

Cara config ONU FIBER HOME

UNO FIBER HOME YANG LAMA

telnet 192.168.1.1
Login username:

fiberhomeuser*&^%$

(enter)


Password

fiberhomepass$%^&*

(enter)

en

(enter)


fiberhomepass$%^&*

(enter)


cd gpon

(enter)


config password (onu password)

(enter)
DONE
BYE!

Cara Upgrade Firmware TP-LINK ARCHER AC1200 3 AERIAL

 

IMPORTANT NOTE

1.C1200v1_eu_tm_up1.0.0_Build_20190805_rel.22215 (upgrade firmware yg ni dulu)

2.C1200v1_eu_tm_up_1.0.0Build20200306rel.15999_20200306_15.16.53 (diikuti firmware ini)

***perlu berhati-hati / sila disconnect WIFI & VPN dulu. Hanya LAN cable ke Router saja.

Please be reminded that after the firmware upgrade, your Wireless SSID will be changed to new SSID with @unifi. (Eg; customer_a@unifi) . You may need to re-authenticate your wifi SSID connection for using the Wireless connection 

Dicadangkan tuan2 untuk buat hard reset / factory reset selepas berjaya upgrade firmware baru. Ini untuk mengatasi masalah CCTV/DYDNS not connected.

* Sila lakukan upgrade firmware baru dengan berhati2 supaya tidak merosakkan RG TPLINK pelanggan.

Setting Fix IP Address Router DLINK 842

Pastikan router TM Dlink 842 (4 ANTENA) telah install firmware terbaru. VERSION 3.06TM.

 

 

 

 

 

 

 

 

 

ATAU JIKA SUBNET 255.255.255.252 (1 FIX IP ADDRESS SAJA) SETTING SEPERTI INI

 

 

 

 

 

HOW TO SETUP ROUTER FIBERHOME SR-120A

LOGIN VIA http://192.168.1.1

 

• Check the firmware version, which is SR_V1.02 (latest)


Removing VLAN 400 configuration for residential customer
1.Go to Advanced Setup and click on WAN Service

2.Expand the WAN configuration (with arrow), click on VID 400.

3.Click ‘Delete’ to remove configuration of VLAN 400.

•Insert PPPoE account
1.Go to Advanced Setup and click on WAN Service

2.Confirm the connection name with ‘1_INTERNET_R_VID_500’

3.Fill in the PPPoE username and PPPoE password

4.Add binding of VLAN 500 to LAN 3.

5.Lastly, click ‘Apply’ to activate the internet service.

6.Go to Status and click on ‘WAN’ to check the WAN connection status of IPv4 and IPv6.

WIFI CONFIGURATION (2.4 GHZ)

1.Go to Basic Configuration and WLAN, click on Basic Config 2.4GHz

2.Make sure WLAN 2.4GHz and SSID are enabled.
3.The SSID name can be set manually, click ‘Apply’ after changed.


4.Go to Security Setting 2.4GHz, WiFi password/WPA Preshare key can be defined according to customer preference.
5.Click ‘Apply’ to activate the setting.

 

WIFI CONFIGURATION (5 GHZ)

 1.Go to Basic Configuration and WLAN, click on Basic Config 5GHz

2.Make sure WLAN 5GHz and SSID are enabled.
3.The SSID name can be set manually, click ‘Apply’ after changing the SSID.

4.Go to Security Setting 5GHz, WiFi password/WPA Preshare key can be defined according to customer preference.
5.Click ‘Apply’ to activate the setting.

END

 

MENU